Sorry for the odd question but what is the right pop off direction on the RS2 stock system? I think in mine it is not right.
Fotos where great
Fotos where great
-
Go Holset or Go RS4 -
Please people fast if you can!!! I must make it now because i must travel in the night!!!
Shot a picture of yours!!!Go Holset or Go RS4 -
Would love to help dude but not sure what you want!Ragusa Coupe gone!
sigpic
VW T4 Multivan. TSW Holstens hiding in the garage for the winter.
VW Mk1 Caddy pickup, modded or "ruined"
vw T5 Kombi. In the process of being "ruined"Comment
-
Do you mean the dump valve positioning??Comment
-
Turbo (pressurized hose) from the side, maf (intake hose) from the bottom. Assuming, that small hose is "top".Originally posted by groofosp
The picture above with pressure from "bottom" - seems to be incorrect, because at certain level of boost, it can push the diaphragm and get out as a leak
.
At least what audi says here http://www.quattro.ca/3b/0032.jpg
(huge picture, picture you need is on the bottom of it).
If you have pop off with really hard spring (rated at 1.5 bar for example) then you connect pop off whatever way you want.
BTW, this is my opinion, it may be wrong
SauLast edited by kwlw; 14 March 2005, 16:32.200 20vt 88' 3b, human carrier
CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.comComment
-
Thanks people! That was what i want! Should it be like in the picture?Go Holset or Go RS4Comment
-
Thats the way it is designed to go.
But it will work in either direction. Some people run aftermarket valves the other way.Comment
-
My car has it like in the picture of matinjs!!Go Holset or Go RS4Comment
-
Its not mine .
Stole the pic from one of honahon's posts
Comment
-
Me for exampleOriginally posted by martinjs
. However that small black bosch thingy, which was blown on my engine, seems to be designed to work from the side.
Sau200 20vt 88' 3b, human carrier
CQ typ85 with AAN inside, see project blog at http://kwlw.blogspot.comComment
-
then it is allright! I have seen some Tuned forge ect and get confused!
GreetingsGo Holset or Go RS4Comment
-
The stock TBV's don't like being the wrong way round - BTDT !Originally posted by martinjs
Most aftermarket piston type ones don't mind which way round they go ...
PaulPaul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
Comment