Help with parts

[orignalS60]

Does anyone know where I can find
new factory main bolts for an AAN
engine? All I can find online are the
ARP studs.

[RichLV]

Here's the part number - N90130001

[UrS4boy]

You didn't look very hard. Genuine Volkswagen Audi Parts (GVAP) in San Diego lists them for $1.99 each.

http://genuineaudiparts.com/parts/in...&siteid=214407

You do know about Ekaterina, right?

http://audi.7zap.com/en/usa/audi+100.../103-103020/#3

Crank cap bolt torque (from page 27/93 of http://s2-audi.co.uk/workshop/aan/aan.pdf ) (Not stretch bolts so they could be reused)

[orignalS60]

I typed it into google many different ways
and the only thing that would come back is
arp main studs. Also on GAP when I would
click on engine it would only give me external
engine parts. Nothing block related.

[UrS4boy]

Ekaterina and learning where things are within her data base is the way forward.

Then take the PN to GVAP or ECS and you get what you need.

I only use Google to find photos of the part once I have the part number, not to find the part number.

[orignalS60]

Thanks for the help. So since they are not stretch
bolts do you still recommend reusing the ones in my
AAN now? For all I know they are the originals with
over 290,000 miles on them.

[UrS4boy]

Thanks for the help. So since they are not stretch
bolts do you still recommend reusing the ones in my
AAN now? For all I know they are the originals with
over 290,000 miles on them.

The old ones are probably just fine but for $24 plus shipping (probably $10), for the required 12 bolts, I would go new. (IMO)

[orignalS60]

Paging Dave! I went on ekat for the part number
for new piston pin clips and it lists 2 different numbers
but the clips are all the same. I was hoping you or
someone else on here has some insight.

Part numbers:
N 0122731
N 90558301

[Thuppu]

Normal M10x80 10.9 grade bolts from your bolt store is fine, no need to be OE if they are difficult to source.

[Rikki Kitto]

Thanks for the help. So since they are not stretch
bolts do you still recommend reusing the ones in my
AAN now? For all I know they are the originals with
over 290,000 miles on them.

Double check your info I think they original bolts may be stretch

[popdemonic]

http://www.ebay.de/itm/281273287724?...84.m1436.l2649

I believe this seller has one on german Ebay.try quick search on his store.

[orignalS60]

Damn that's a pretty nice kit. I already bought
some bolts from GAP but now I'm having some
trouble with other parts. I'm looking for new piston
wrist pin cir-clips.

Ekat lists two seperate part #'s for the same product?
Part numbers:
N 0122731
N 90558301 ?????? I bought x10 of these.