Gt3076 Hta

[nip]

Evening all, what is a Hta wheel I've heard a few pals taking about putting a Hta wheel on a 3076 is this a big upgrade, will it make much more power and torque, will it be better than a gtx3076. also does anyone know who does it cheers

[SteveH]

HTA wheels are billet machined and are a modern design. Check our Forced Performance website for the options. It looks like the GTX wheels are similar in design/flow.

[nip]

HTA wheels are billet machined and are a modern design. Check our Forced Performance website for the options. It looks like the GTX wheels are similar in design/flow.

Cheers Steve, looks good tbh, from a quick glance at the site I think they only sell complete units is there anyone that can do my unit

[PRY4SNO]

EDIT:

Hank summed up the difference pretty well on Motorgeek:

I think the easiest way to think of the billets is that the HTA lines tend to flow what the normal cast wheels do, but they do it with smaller wheels/more efficient wheels. This means they spool faster.

The GTX is somewhat the opposite. They Spool the SAME as the regular cast wheels (they weight virtually the same) ... but the better wheel design makes it have a 10% increase in flow, plus crazy high efficiency at higher pressure ratios.

[nip]

EDIT:

Hank summed up the difference pretty well on Motorgeek:

Cheers pry4sno I like the gt35hta results

[A80Avant]

I have the HTA3076R on a 0.63AR
On my measurements I have done up to 480-490hp with an uprated head and slightly larger valves. 3 inch downpipe and back boxes.

Spool comes at 3d gear around 3900rpm but on higher gears much sooner, that on 5th and 6th it surges a bit

[Ruffiano]

I thought the HTA was replaced by the xona line?

[nip]

I have the HTA3076R on a 0.63AR
On my measurements I have done up to 480-490hp with an uprated head and slightly larger valves. 3 inch downpipe and back boxes.

Spool comes at 3d gear around 3900rpm but on higher gears much sooner, that on 5th and 6th it surges a bit

That's good results 👍🏽

[A80Avant]

I thought the HTA was replaced by the xona line?

What's that? Never heard of it

[Ruffiano]

It's the new line, I'm pretty sure they replaced the HTA line....

[Ruffiano]

Hank is running them in his TT-RS 5 cylinder applications

[PRY4SNO]

I've been wondering where Xona came from...

[A80Avant]

I see billet Center sections. Neat