oversize rod and crank bearings

[rxl]

can somedobdy give me some part numbers for sputter bearings for rs2 first oversize.. so 0.25
thanks

[Pirvu Eugen]

I don't think they exists...
Normal ones yes... but sputter no.
Maibe somebody will correct me...

[pasbogdan]

Will give you a pn tomorrow.
99% i remembrer KS was also available sputter +0.25
But why to do so?Price for a profesional crank work+polish will be much more compared to a perfect condition used stock dimension crank.

Found:
Rod:77244610 sputter+0.25
Main:87454610 +0.25
or:77209612 +0.25

Difference in material and may be the shape also for the middle bearing(axial bearing).But i do not have all data available at home.

[Pirvu Eugen]

Great news!! As I have some cranks with 0.25.
Thank you Bogdan!

[rxl]

thanks for the info great News
crank refubishment does not cost so mutch i think my last was something like 50 euros and you cant get a good one for that Price..
i had glynco sputter 0,25 ones for my stroker build but forgot to write down the part numbers...

[pasbogdan]

Here for regrinding main and rod a full crank is 100+eur.Polished more.
That is why i never regrind any crank.If you can get at 50 eur all done professional i might have some cranks to do.

[rxl]

i think the shipping would be a killer

[igor136]

Page 32

http://www.s2-audi.co.uk/workshop/aan/aan.pdf