B4 cq aan:cooling radiator solutions

[pasbogdan]

As title says,i ask your help to get a fast solution to mount a radiator and clear the aan intake manifold/throttle body/isv.
I can buy a new one b2,b3,b4 etc.Just need to know the best/easy way to do it.I remember something about getting the b4 5 cylinder radiator in angle and little to the back to clear the aan manifold?Or do you found another smaller radiator comming from another car/brand of car that will fit?Maybe someone who builds custom ones,but we need a fast solution

Thx!!

[pasbogdan]

Found this:http://www.s2forum.com/forum/showthr...t=41990&page=2

Managed to look and find a small radiator.1994 honda civic 1.6.
Dimensions:350/350/24mm vs audi 470/379/36.
Someone said the smaller one got to heating problems.I might try it.We have a long,small width front coolant radiator custom made with 2 coolers on it.And with this honda one i think will do.
The front one with coolers is something like 600/200/30.Or similar,it will cover all front area where s2 aby/3b/adu has aux radiator.
But we have to fit also a 250/180/30 aprox custom oil cooler.Where?If the front of the car is full with aux radiator and intercooler?

[varia]

get an intake that works (mtm, wagner, modified 3b or aan) and leave the radiator alone.

[pasbogdan]

We have no main radiator and electric fan at this moment.
We have the aan manifold,the aux custom long radiator with 2 fans.Also the front custom crossmember that holds the aux radiator,fans and intercooler.So we need to find or build a main radiator+fan.
If we change the manifold we will need also main radiator and electric fan.

[PRY4SNO]

Or... you could could fab brackets to run a front rad from a mk4 bora/golf.

http://www.motorgeek.com/viewtopic.php?f=6&t=26370