RS2 Exhaust manifold options

[adam g]

And make a good turbo brace....

Do you have any images of a good turbo brace. Interested to see where you mounted it on an I5.

Sent from my D5803 using Tapatalk

[Error404]

And make a good turbo brace....

[RichLV]

Use it properly and you will not have cracks. Don't stress it while it's cold and let it cool (idle) after a longer drive, and you should be just fine.


Sent from my iPhone using Tapatalk

[orsum]

Just do not wish to have cracking etc.

SQ looks nice

Looks like a direct fit from the pictures, is it??

orsum

[RichLV]

RS2 Exhaust manifold options

I thought they stopped making them!!



Are they good, anybody had issues? RichLV how long have you had yours fitted, did you have any issues?



What about tubular



orsum

Have mine for around 3 months. No issues yet.

Tubular is better if you want equal length headers.


Sent from my iPhone using Tapatalk

[UrS4boy]

Some cast EM flow numbers

I thought they stopped making them!! Are they good, anybody had issues? RichLV how long have you had yours fitted, did you have any issues?
What about tubular. orsum

If you are staying with a K24-7000/7200/7400 series turbo, snag the Wagner RS2 EVO EM and be more than happy. It flows better than either the RS2 EM or the Sport Q EM. Tubular = pain unless you are going Holset, etc.

Read this: http://forums.quattroworld.com/s4s6/msgs/80650.phtml

[orsum]

I thought they stopped making them!!

Are they good, anybody had issues? RichLV how long have you had yours fitted, did you have any issues?

What about tubular

orsum

[RichLV]

Wagner is the obvious choice. I have this one, brand new, LS-Cartec made.

http://www.ebay.com/itm/Turbokrummer...4AAOSwKtVWxdWt

[piotr]

Maybe you could try Carsten?

[orsum]

Looking for an alternative RS2 exhaust manifold that is a straight bolt on and oil pipes in the same position.

I have an original manifold but don't think I am going to use it, it has been welded.

So I am looking for recommendation for a good solid manifold that fits stock position and stock connections to suit the original RS2 Turbo.

Regards

orsum