new turbo but witch one

[s2dk]

hello

im thinking of getting a new turbo on the car.

im looking to get fast spool maybe max peak around 3000-4000 rpm and my power goal is in the 450-550 hp between 1.5-2 bars pressure.

gtx3071r a/r 0,82
gtx3076r a/r 0,63
gtx3582r a/r 0,63
pte6062 gen 2 a/r 0,63
pte6262 gen 2 a/r 0,63

what do u guys think?

[ProX]

http://turbobandit.com/TURBO-Engine-tuning/Turbochargers/billet3

http://turbobandit.com/TURBO-Engine-tuning/Turbochargers/TB60-02

[RichLV]

If only they made turbos for the K24 flange... But they seem to get pretty popular.

[s2dk]

Got a t3 on atm 3076 journal bearing

[s2dk]

allso there is the new gtw line.

[diesel des]

My efr does 450 bhp on a stroker with full boost just before 3k rpm. For more power an efr 7163 should do 500 plus with full spool on a non stroker at about 3500 rpm. Or I liked my gtx2867r for almost 450bhp and quick spool. Gtx35 is way too much for 550 bhp.

Sent from my LG-H955 using Tapatalk

[s2dk]

Its just i want room for more power later on thats why

[K Simmonds]

T3 flange manifold opens up a better choice of turbos than K24/6, The Borg Warner EFR range seem to give excellent results and are really good quality. If I was starting from scratch with more money a 7163 would be my first choice.

You can use a Garret as well as other makes on a K26 flange using a Turbonetics hot-side housing.

Link below gives details of the entire range, the K26'S are about halfway down the page, some machine work maybe required to fit them.

http://thmotorsports.com/turbonetics...g/g-51046.aspx

Here's an example of a K26 unit.

http://thmotorsports.com/turbonetics...1/i-77594.aspx

There's also various K26/7 hybrids that'll do 450+ BHP, Vidar Skotheim (on here) currently has some for sale and 'TheTurboEngineers' offer some great turbos, not cheap though I guess you get what you pay for...well one would hope so.

[Drummer87]

I'll be watching this and adding some comments. Myself also will be considering different options for a street able turbo that gives some punch. I'm not after high top end speed cause I'll never see that. More cruise and catch folk off guard and get the power to the wheels and shift quickly. I'm not a number chaser, just after a reliable setup. Assuming a Wagner k24 em is going to be more than enough and higher flow injectors and fuel delivery. What turbo would anyone recommend. Not hijacking just curious

[s2dk]

Think im going either pte 6062 gen2 or maybe gtw3476r
They seem to fot my goal but may suffer a bit on spool but thats fine

[K Simmonds]

I'll be watching this and adding some comments. Myself also will be considering different options for a street able turbo that gives some punch. I'm not after high top end speed cause I'll never see that. More cruise and catch folk off guard and get the power to the wheels and shift quickly. I'm not a number chaser, just after a reliable setup. Assuming a Wagner k24 em is going to be more than enough and higher flow injectors and fuel delivery. What turbo would anyone recommend. Not hijacking just curious

RS2+ Spec will satisfy those requirements....for a while.

[diesel des]

RS2+ Spec will satisfy those requirements....for a while.[emoji38]

Or the Volvo equivalent turbo.

Sent from my LG-H955 using Tapatalk

[K Simmonds]

Yep, or one of them, their even better low down response from what I've read. Been trying to find one cheap to give a whirl before go nuts with K26/7

[K Simmonds]

OP, the Holst HX35Super is a good choice if your on a budget.

[s2dk]

Im not on a budget. ☺