3B Hall sender

[gmac78]

Hello guys,

I think my G40 Hall sender might have failed, does anyone know where i can buy one?

Is it a 3B specific one i need or will and ABY/AAN be the same part. I know they are mounted differently but possibly the same item.

Thanks
Gordon

[UrS4boy]

3B and early UrS4 G40 Hall Sender replacement

Hello guys, I think my G40 Hall sender might have failed, does anyone know where i can buy one? Is it a 3B specific one i need or will and ABY/AAN be the same part. I know they are mounted differently but possibly the same item. Thanks
Gordon

Same item (basically). Fortunately, I have already done a DIY that you should read:

http://12v.org/urs/ReplacementOfTheH...istributor.pdf

The Hall sender is like this one:

http://www.efiexpress.com/catalog/pr...products_id=95

[gmac78]

Your a mountain of knowledge sir, good man!!

I'll get one ordered ASAP. It's really annoying having done all this work and not been able to sample the fruits of my labour!!

It will be a good day when i finally sample RS2 power in the coupe. Should be a lively wee thing!!

[UrS4boy]

I'll get one ordered ASAP.

If I remember correctly, there was a Group Buy here recently. Some one might have a spare running loose. Or there might be one on eBay that would work:

http://www.ebay.co.uk/itm/HALL-IGNIT...cAAOSwAYtWJnNL

http://www.ebay.co.uk/itm/Distributo...4AAOSwjVVVp9mU

[Macchris]

on my AAN i do the same than URS4boy, dont want to spent 100 euros on bosch hall for a spare engine, so i try a topran Passat hall and with cuting wires a solderint it works

here i put a Vagcom with this 'wires try' and it was ok so .....


i cut & solder ;-)

[Macchris]

forgot to say it cost me about 16 euros ;-)