Holset HX35 Copressor Racing

[ristokru]

Hi,

i found very interesting turbo. It spools very low and thats what i am looking.
But does it go to S2 and is it so good as they say?
http://www.ebay.co.uk/itm/262693716696

600bhp+ and full boost by 3500rpm is proven on 2ltrs using good twin scroll manifold setups. Full boost by 4000-4500 using single scroll manifold

[SteveH]

It's been said on here that they are cheap chinese knock off's.

[ristokru]

It's been said on here that they are cheap chinese knock off's.

Ok. Bad info to me. It looked so good turbo for S2 as it spoolt 3500rpm.

[s2dk]

But wasent the 3500 spool on a twinscroll ? Then it might not be that when using a single scroll

[Kiku]

With twinscroll you also need a proper manifold built for twinscroll turbo otherwise it wont work as it should.

[Thuppu]

Twinscroll work just well. You just can't make a proper pulse manifold with 5 runners. Almost all Holset turbine housings are twinscroll and they have been proven working well on these engines with just singlescroll manifolds.

With a proper twinscroll pulse manifold(4, 6cyl) you may ge some better spoolup though.

[Kiku]

Twinscroll work just well. You just can't make a proper pulse manifold with 5 runners. Almost all Holset turbine housings are twinscroll and they have been proven working well on these engines with just singlescroll manifolds.

With a proper twinscroll pulse manifold(4, 6cyl) you may ge some better spoolup though.

Jep, i ment the same by that, that the turbo will not spoolup so fast as they could.

[Jelle..]

And a twinscroll with a quickspool valve?

Like this: