Aftermarket cams?

[ziopinulo]

Hi all!
I've bought some parts among wich these cams:
image.jpg
The lift is higher than stock.

Someone has an idea of what can they do?

[mushasho!]

Send them to me, I will find out for you what they can do with a PTE6062, E85 & VEMS ...

[michaels2s]

They look like CatCams.
What Number are on the cams?
When you give me the numbers i can send you the specs.
From the Picture they look like 11,75 Intake and 11,75 exhaust lift.

If they are then the number is : 1002452T

[vti2]

Have to shimm the head for so much lift.

[michaels2s]

No i would prefer to grind the valve baskets in the Piston deeper.

[vti2]

That would be also an Option.

[A1QSHIP]

Misunderstood

[ziopinulo]

They look like CatCams.
What Number are on the cams?
When you give me the numbers i can send you the specs.
From the Picture they look like 11,75 Intake and 11,75 exhaust lift.

If they are then the number is : 1002452T

thanks! sunday i will take a look

[ziopinulo]

They look like CatCams.
What Number are on the cams?
When you give me the numbers i can send you the specs.
From the Picture they look like 11,75 Intake and 11,75 exhaust lift.

If they are then the number is : 1002452T

hi michael the cams have stamped the code 1002331

cat cams.jpg

[ziopinulo]

ok. i've found them in catcams site. are steel billet sport cams.

http://www.catcams.com/products/camshafts/datasheet.aspx?ENGINE_id=23&CAMSETUP_id=153

can someone explain me their behavior?

[Audi_CQ]

ok. i've found them in catcams site. are steel billet sport cams.

http://www.catcams.com/products/camshafts/datasheet.aspx?ENGINE_id=23&CAMSETUP_id=153

can someone explain me their behavior?

Close to 7A cams.

[michaels2s]

exactly.....not bad to put in and test.
CatCams do also nearly the same cams for mechanical lifters.

[ziopinulo]

i would like but they havent dizzy gear..

[_ShurikeN]

A good reason to go towards front hall sender.

[ziopinulo]

A good reason to go towards front hall sender.

i miss an ABY/AAN ECU