Vems egt wont work ?

[s2dk]

Hello
I have a bit of a problem with my car
I'm on a vems pnp
Yesterday I fittet a 6 mm egt probe
There is a egt line from Euc with a green and white wire
I have put them green to green and white to white
Nr 1 problem
It reads 0-5 degrees before probe was is it was just 0
Nr 2 problem
Can't seem to find the menu for egt settings in vems tune ?
Anyone got an idea ?

[quattro-nick]

if i remember correct you dont have settings in vems about egt,only for saftey matters
i have had no problems when i installed my egt sensor on vems,maybe you have a bad egt sensor? not the correct one? i bought mine from "efi express"

http://www.efiexpress.com/catalog/pr...products_id=89

[s2dk]

Isent there a calibrating setting ?
Hmm mine is from the Danish vems distributor

http://www.vems.dk/dk/sensor/42-udstodnings-foler-egt.html

It Could be faulty though

[A80Avant]

There is no calibration for the get sensor.

[s2dk]

What. But i have read it on the internet on vems sites ?
Maybe that is not in the pnp box for s2 vems ?

[Thuppu]

Any help? http://www.vems.hu/wiki/index.php?pa...EgtCalibration

[s2dk]

Did see that before it states That since 2008 i dosent need to calibrate

Thats Maybe Why i cant find a calibrate menu ?
Maybe my probe is not working

[A80Avant]

Much more rare is for the motherboard to have issues. I think Billman had this once upon a time on a very early vems unit he had. Myself I have changed 2 Egt probes all bought from vems Hungary. I found that the thin one is more robust than the 6mm one. Now I always keep one as a spare.

[s2dk]

Hmm Maybe it is damaged Then
��

[A80Avant]

Try another probe and if it does the same you may have to look at the ecu