Cold start rattle ?

[RichLV]

Could it be the plastic splash guard inside the cam cover (the bit you can just see inside oil filler) come loose and rattling against a cam?

Unless it's broken - unlikely. If it's the original (native) splash guard, it's being pushed down by inner rib of the cam cover.

[s2dk]

Last time i had the cover off it did not Seem like a chain problem
And the noicy goes away after 5-10 secs cant see Why chain shoul be the one To rattle
It has No tentioner sp Oil pressure should not affekt it

[RichLV]

Last time i had the cover off it did not Seem like a chain problem
And the noicy goes away after 5-10 secs cant see Why chain shoul be the one To rattle
It has No tentioner sp Oil pressure should not affekt it

If it goes away, then most likely it's the tappet noise. It could be worn tappets, bad block check valve (oil flows from the head to the oil pan when the car is off), oil too thin, bad oil pressure.

[s2dk]

Check valve in block is new old was fine
Dont Think its oil thikness. Oilpressure i have No idea What it should read when cranking? Think it reads 1 bar or 1.5
In cold idle it maxes the gauge

[RichLV]

Check valve in block is new old was fine
Dont Think its oil thikness. Oilpressure i have No idea What it should read when cranking? Think it reads 1 bar or 1.5
In cold idle it maxes the gauge

About the same as mine.

Change the tappets then. They're not expensive. I bought a full set of INA hydrotappets for ~60 euros.

[s2dk]

What were did you find Them at that Price ? Last i notice the Price it was 150 euro here in denmark

[RichLV]

Jesus, Denmark really is expensive place to live ... At our local shop, 3.27 eur a piece...

[s2dk]

Is there a site or something were it Could be bought from ?

[SteveH]

Old, tired hydraulic lifters can leak down when the motor is left overnight. Replacing them or disassembly and cleaning will sort any problems with leak down. Based on the cost of replacing them, I'd replace before cleaning 20 of them. BTDT.

[s2dk]

Hehe Yah thinking Thats my problem. But Allso want new jonus cams in at the same time bit have to get the cams first
I found some lifters on here. Autopartsmarket.eu. There the lofter are 4 euro a piece
Any other place they are 7 euro both Said to be ina
Im like how Can it be that much cheaper are they fake ina lifters?

[RichLV]

Haven't seen such a thing as "fake" INA lifters. Been buying these for many cars and all have been cheap & working great.

You have a very large overpricing on yours. Thing is, I have 44% off on all car parts in that shop, hence I can get many & many parts really cheap. They cost 5.84 eur a piece if looking at a standard price, so not far from the price you're seeing.

I can even get a +0.5 oversize INA lifters from there, but those do cost a fortune.

[s2dk]

Yah they have the oversize one But Why go for that one ? What should That do better ?
So it safe to say that i Could Buy the lifters here and save a lot vs eBay or autopartshop.co.uk

http://autopartsmarket.eu/en/?action=catalog_part_info_view&art_id=2823907&return=action%3Dcatalog_part_view%26data%5Bid_make%5D%3D1%26data%5Bid_model%5D%3D6%26data%5Bid_model_detail%5D%3D1465%26data%5Bid_part%5D%3D10524%26data%5Bsort%5D%3D%26data%5Bname_group%5D%3D

[RichLV]

Seem like regular INA tappets. And besides, they're discounted to 3.90 eur. Just get 'em and replace your tired ones.

[s2dk]

Yah its freakong cheap. A dealer here ind dk wanted 24 euro for one ���� Will try and order some new ones the thx

[RichLV]

Yah its freakong cheap. A dealer here ind dk wanted 24 euro for one ���� Will try and order some new ones the thx

That's what an oversize lifter costs for me. Maybe he was offering you that one.