cylinder head update question

[rxl]

well i have a crack free head now and was wondering what makes sence
1. just overhoul the head with the stock componnents.
2. put supertech oversize valves titanium retainers and harder springs. have them from another project.

dont know if i want need or the porting of the head and does it makes sence as i dont have plans to go big power.

any advices would be apreciated.

[A1QSHIP]

A question of "while you are in there" & what your budget can afford.

[Costash]

Back cut on valves and seats 3 angles and you good to go.Keep it simple if you don't do any competitions.

[rxl]

Well I don't know about the budget but I have these on the shelf collecting dust.

Gesendet von meinem EVA-L09 mit Tapatalk

[europeanme]

Well I don't know about the budget but I have these on the shelf collecting dust.

Gesendet von meinem EVA-L09 mit Tapatalk

put them to good use then...

[rxl]

so its worth putting the stuff and not porting it ??

[quattrito]

On the turbo engines porting doesn't make such an impact as for N/A. So if the porting isn't cheap I wouldn't do it.

[europeanme]

so its worth putting the stuff and not porting it ??

As Costash suggests, 3 angle valve seat cut and that should do it....if you have the supertech parts then use them, not much use gathering dust....