Custom turbo pipes

[Greg_S]

Just had a quick word with SFS and they reckon they can make me a custom silicone pipe up to go from the MAF to turbo with take off's for DV and WGFV for about £35

RESULT!!! think that will be about the cheapest part of my upgrade so far, just need to make a template for them of the centre part with the two take off's

Greg

[Doug_RS2]

I have a spare ribbed hose now if you want it?

And if Martyn is doing the same mod he'll be after one of these - get 2 for cheaper?

You could get the breather connection as well(just block it off) - I don't know if Martyn would be planning a catch tank mod at the same time? Mark and other high power guys reckon it's a must.

[91_S2]

Sounds interesting! Keep me in the loop.

[Doug_RS2]

Originally posted by 91_S2
Sounds interesting! Keep me in the loop.

This is for a turbo with a 70mm compressor inlet - are you planning on a big turbo with bigger inlet 91_S2?

[Greg_S]

yeah, i need to confirm if its 35 for whole pipe or just section with the two take offs.

Talking off catch tanks they arrived today, very nice and shiny

Going to see if i can get a template made up at my old work next week so can get the pipe made up.

Are you putting the breather mod on martyn? want one of these?

Greg

[Martynf]

How much we talking in total Greg?

[Martynf]

Greg, also... looks like I'll be following all your mods pretty darn soon too! have you taken lots of photo's and tips for me to follow?? Like the oil and water pipes that have been modified, spacers etc....

Martyn

[Greg_S]

once ive got the template made up im going to take a trip over there, but they said 35 over the phone to me but wasnt certain if it was for the whole pipe or not

[Greg_S]

Hvent fitted any of the bits yet, ebeen getting them all and then gonna do all at once.