timingbelt slac?

**zlobo** · 1 June 2005, 22:29

and here is the pic

Attached Files

**Jeffer** · 7 June 2005, 11:58

90 degree turn is ok. Thats what the manual says

**zlobo** · 7 June 2005, 13:17

yes but it depends if u have stong fingers u can twist a harder tighten belt.

**S2 Ant** · 7 June 2005, 13:44

its 90 degrees with reasonable force, not 90 degrees with all your might

**Jeffer** · 7 June 2005, 14:05

**SteveH** · 7 June 2005, 16:13

If it's too tight it will whine all the time BTDT. You should be able to deflect it by 90 degrees with reasonable effort.

**prosty** · 7 June 2005, 16:16

1-2cm flex and 90 degree turn with normal force?

**zlobo** · 7 June 2005, 21:17

Originally posted by prosty

1-2cm flex and 90 degree turn with normal force?

Tack

Comment