Sport quattor bonnet for UR

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • diesel des
    S2Forum Possessed
    • Feb 2004
    • 3896

    #1

    Sport quattor bonnet for UR

    Where can i get a sport quattor bonnet for my UR? only http://www.dialynx.co.uk/ or? How much can i expect to pay? Thanks,des
  • 220bhp
    S2Forum Fiend
    • Nov 2004
    • 2578
    • Home: United Kingdom

    #2
    according to the audi quattro book £11000yes eleven thousand

    Comment

    • coupegt
      S2Forum Addict
      • Jan 2005
      • 218
      • Country: Denmark

      #3
      http://sgi-online.de/

      has a "S1" hood priced at 529,00 €

      Ive bought some parts from them (not the hood though, too pricey IMO) and they were fiberglass parts, so expect some adjustment, heard that especially the hood can be a pain.

      Comment

      • diesel des
        S2Forum Possessed
        • Feb 2004
        • 3896

        #4
        Anyone in the UK?

        Comment

        • quattronutter
          S2Forum Maniac
          • Jan 2005
          • 690
          • Country: United Kingdom

          #5
          ive had several from dialynx over the last few years,generally a good fit,but im not too sure whether they are still doing them..

          Comment

          • Baldy
            S2Forum Addict
            • Jun 2004
            • 469
            • Home: Sikkim Current: British Antarctic Territory

            #6
            unless you have the full S1 front end the S1 bonnet will not fit because the front on the S1 is slightly longer than the coupe .What made dialynx's bonnet different is that they made 1 to fit an ordinary Audi coupe
            Nautic Blue UR-Quattro RS2spec ABY20v kkk26/27 hybrid,Bremsport Brake Kit n some other Gubbins.water injection. Mihnea tuned Management The old Bus
            0-60 4.9
            1/4mile 13.5

            Comment

            • diesel des
              S2Forum Possessed
              • Feb 2004
              • 3896

              #7
              ahhhh i see.

              Comment

              • philip walker
                S2Forum Addict
                • Jul 2005
                • 254
                • Country: Wales

                #8
                BR Motorsport in Lemington spa, Brian Ricketts. not sure if he has retierd. There were some very nasy ones kicking about a few years back RA designs was involved in making them in his "canoe" factory I think.

                The best one I saw was done on the original bonnet no bulges just the vents from the "sport" cut into the original steel bonnet over the metering head and inlet manifold.

                The genuine Audi one has been reduced in price to around £2200 plus vat, then you have to have the 3 small grilles @ £300 each plus the under trim. I am fairly sure it will not fit the ur quattro. Never tried too
                Last edited by philip walker; 27 September 2005, 07:23.
                sigpic

                Comment

                • ~Delta
                  S2Forum Maniac
                  • Apr 2005
                  • 797

                  #9
                  I bought mine from PSG in Maesham, Derbyshire. Cost me in 1999 £205
                  Never show a fool a half built house.
                  Never underestimate the power of stupid people in large groups.

                  Life is like a **** sandwich
                  The more bread you have, the less **** you eat

                  Comment

                  • diesel des
                    S2Forum Possessed
                    • Feb 2004
                    • 3896

                    #10
                    Thanks folk. Wil keep ya posted...

                    Comment

                    • niall1
                      S2Forum Enthusiast
                      • Dec 2004
                      • 145
                      • Country: Ireland

                      #11
                      Originally posted by philip walker

                      The best one I saw was done on the original bonnet no bulges just the vents from the "sport" cut into the original steel bonnet over the metering head and inlet manifold.
                      I was looking for one in exactly this style. Do you know if it's available to buy anywhere?
                      1984 Pearlwhite ur quattro (3B 20v power - 034EFI/RS2 modded)

                      Comment

                      • philip walker
                        S2Forum Addict
                        • Jul 2005
                        • 254
                        • Country: Wales

                        #12
                        Not sure it was about 14 years ago.
                        There was a company offering MK2 Golf bonnets with a choice of similar vents cut into the steel. They looked ok in the advert, never saw one in the flesh.
                        sigpic

                        Comment

                        • diesel des
                          S2Forum Possessed
                          • Feb 2004
                          • 3896

                          #13
                          Getting one from Aelred. Great bloak!

                          Comment

                          Working...