You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
The rear bumper has a couple of screws holding it in place inside the wheel arch. I need the part number (and opinions on whether it's easy to fit or not) of the piece of plastic (I guess) that the screws go into. Diagram also useful if there's one out there. Drivers side.
Thanks!
Ck.
Shocked, exhausted, hosed, bushed, dumped, chipped, mounted, filtered, gauged, packed, intermittantly wiped and braked. I mean broken. Now, about the car...
Not that hard, other than they are as rusty as hell and the captive nut in the wing will probably NOT be captive once you try to undo it!! I used copper slip on teh scew threads of mine, they then come undone every time.
And thanks for the tip - I'll dig out the copaslip from the box of brake pads.
Ck. Now all I've got to to do is persuade the other half that getting the bumper fixed on right is more important than even more shoe shopping
Shocked, exhausted, hosed, bushed, dumped, chipped, mounted, filtered, gauged, packed, intermittantly wiped and braked. I mean broken. Now, about the car...
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment