RS2 door trims

**Rocco** · 9 March 2011, 21:27

Originally posted by Dan

Bin them and buy a new Audi, they hope

i dont like too much the new AUDIS...

**sailaz** · 10 March 2011, 11:40

actually problem is protection strip for mudwing. protection strips for doors can be used from:

**smiler** · 11 March 2011, 16:41

Why not try to find someone who can make the lower trimms?

And in better material...

I neeeed a set

**Jamo** · 11 March 2011, 17:08

Smiler you have an RS2 so you have the originals which can be molded, sort it out I need the middle and lower door trim

In hindsight I had the chance to buy them but bought big brakes which was more of a priority

**Rocco** · 11 March 2011, 19:19

Originally posted by Jamo

Smiler you have an RS2 so you have the originals which can be molded, sort it out I need the middle and lower door trim

In hindsight I had the chance to buy them but bought big brakes which was more of a priority

what brakes ????

**madpugger** · 11 March 2011, 20:34

Originally posted by smiler

Why not try to find someone who can make the lower trimms?

And in better material...

I neeeed a set

If only! Anyone fancy doing this?!

I quite like the look of Breitlings RS2 with his side skirts but there is too much work to do to de trim the doors

**Jamo** · 11 March 2011, 20:40

If you've got the trims I know a man who can on the forum

**madpugger** · 11 March 2011, 20:53

Originally posted by Jamo

If you've got the trims I know a man who can on the forum

Oh?

I do have a set as it happens, the lower trims and centre ones...

**PaulJ** · 13 March 2011, 13:50

If someone is thinking about remaking the lower door trims for an RS2 please consider making the metal backing rail from stainless steel so its a buy once fit and forget job

Cheers PJ

**Jamo** · 13 March 2011, 16:31

Originally posted by madpugger

Oh?

I do have a set as it happens, the lower trims and centre ones...

Fantastic Send me a pm and I'll have a word with a couple of people

**Compi** · 13 March 2011, 18:54

Originally posted by smiler

Why not try to find someone who can make the lower trimms?

And in better material...

I neeeed a set

I need a set too!!

**madpugger** · 14 March 2011, 16:19

PM sent mr Jamo

**Lloyd** · 14 March 2011, 16:23

What's the best product to use to protect the rear side of these trims?
I had a new set put on last year and would like them to last.

**madpugger** · 14 March 2011, 16:52

I would say a sh1tload of Waxoyl...

**Acidburn** · 14 March 2011, 17:58

depending what they are like once done I may go for a set to keep hold of for the future

RS2 door trims

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment