You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Looking for the part nos for the screw fixings on an Avant rear bumper, the 2 'torx' style ones at the top and the 1 or 2 self taping screws near the bottom. All go in from the wheel arch side...
Stealers cant find a piccy on the supa dupa machine thingy...
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk
Looking for the part nos for the screw fixings on an Avant rear bumper, the 2 'torx' style ones at the top and the 1 or 2 self taping screws near the bottom. All go in from the wheel arch side...
Stealers cant find a piccy on the supa dupa machine thingy...
Hmmm? torx style?
The two top ones are split rivets. Two piece plastic rivets that first push through the bumper into the plastic bumper bracket behind (you'll need that bracket, it's unique to the bumper), then a plastic peg that pushes through the middle and splays the rear end out.
Bottom two are as you say, self tapper type screws.
I have the part number for the split rivets, you'll need four of them. 8A0 807 249A
The self tappers I'll measure up tomorrow, and try and find the numbers.
The stealer couldn't find a picture, cos there isn't one. They are listed, just no nice little piccies for them to look at
2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)
Yep, got the plastic mounting parts that fit to the side of the car...and they have 2 metal threaded inserts pointing into the wheel arch. This is where the 'torx' headed screws came from...well only one!
Have to do a piccy of wot i have.
Cheers.
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk
Regarding the TORX head bolt you are looking for. The number is N 90456702 (#26 on the fiche). This is the RS2 stainless steel version. There is a non-stainless version of the same bolt for the S2 that is available too, but I don't know the number.
As for the two lower fasteners, I don't have a clue since I only have experience with my RS2. Sorry I can't help you there.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Mine looks completely different. Bought the brackets new a couple of months ago. 
Comment