removing the rear bumper (avant)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • avants2turbo
    S2Forum Extremist
    • Feb 2008
    • 1287
    • Country: England

    #1

    removing the rear bumper (avant)

    is it just the 2 nuts each side underneath? and sliding it backwards? or is there anything else im missing?
  • saltinot
    S2Forum Extremist
    • May 2004
    • 1946

    #2
    If you're removing it with the mounts in place then it's the two bolts on each side in the loading area.

    Comment

    • Acidburn
      S2Forum Obsessed
      • Jun 2007
      • 13459
      • Country: United Kingdom

      #3
      and 1x screw on the top of the bumper in the middle then just the side screws.

      Comment

      • Skull
        S2Forum Possessed
        • Mar 2004
        • 3506
        • Country: Slovenia

        #4
        like saltinot said, remove the carpet in the boot, you will find 2 big screws on each side. you need to unscrew them and pull them out. than is one little screw on the black inner trim, under the round cap, and then screws under the rear arches.
        Audi Quattro WR

        Comment

        • Flat on my back
          S2Forum Fiend
          • Jan 2007
          • 2449
          • Country: United Kingdom

          #5
          Er...

          These 'll be rusted up

          the ones in the inner rear arches...well is on mine...2 or 3 me thinks.
          Carlos.

          On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk

          Comment

          Working...