My drivers side front arch has rusted through the mounting holes for the bumper. I have just got another one to fit but not sure how you do it. Anybody give me a guide on how to do it? Got like for like colours so hopefully should match up fine 
-
3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips
(just need the RS2 Airbox) -
take your bumper off, 2x13mm bolts either side behind indicators, then pull forward(might have 2 screws into bumper from arch)
then all the bolts along the top of the wing, 2 under the wing where it meets the sill,
open door then theres another bolt(might be 2, cant remember)
and the bolts that were hidden by the bumper
-
Hello, is possible find a original Audi archs from not original one?
Thanks!
Bye
AlessioMy life and my loves
Audi-Porsche Avant RS2
Audi S6 C4 ABT Avant
Audi S2 Coupe ABY
Audi S2 Avant
Audi Cabriolet 2.0EComment
Comment