Need this grill!

[psiconauta911]

Hi all,

anyone knows where to get a grill like this?


Very nice look and elipsoids on 89 hood.

Any help welcome.

[Big Lee M]

That looks quite mean. I'd bet it is a home made job, and a good one of that looking how neat it is.

[Ruffiano]

I posted this thread about a year ago. I have since talked to the owner of that car. it is 2 FK (if i remember correctly) badgeless grills cut and made into one.

[psiconauta911]

and FK is?

[BRY]

Can't find an Fk but I have found this

[BRY]

And this:

[psiconauta911]

Thank you for your help,

the problem is that the elipsoids have a diferent slope on the inner side and these grills will leave a space on the top part to the elipsoids and wont do.

As for the streachting the one in the pic. is diferent from all the after market I´ve seen on ebay.

Probably I could heat one of these up and strecht a bit to fill the gap.

If you take a closer look at the one in the pic. you´ll see it as round edges in ends of the horizontal fins and doesn´t look a regular grill strecht cause all others have perpendicular angles where the horizontal fin ends.

[speeding-g60]

and FK is?

http://www.fk-automotive.com/

[Ruffiano]

http://www.fk-automotive.com/

thats the one, thanks for the backup Aaron

http://www.fk-automotive.org.uk/websale7/FK-ABS-Sport-Grill----fit-for.htm?Ctx={ver%2f7%2fver}{st%2f3eb%2fst}{cmd%2f0 %2fcmd}{m%2fwebsale%2fm}{s%2ffk-automotive%2fs}{l%2fEnglish%2fl}{mi%2f255-2834%2fmi}{pi%2f6403446%2fpi}{type%2fabhsuche%2fty pe}{po%2f1%2fpo}{sf%2f%3Cs11%3EAudi%3C%2fs11%3E%3C s12%3E80%2f90%20%28Typ%2089%29%3C%2fs12%3E%2fsf}{p 1%2fa849a3d8ae31de0d7e7aed11e00698a5%2fp1}{md5%2f3 8096a0acebd60901735f6ee91b782a2%2fmd5}

[frostyflax17]

make your own with a grill that looks like it'll have the same contour and the right bar height... i got lucky with mine... don't ask what it's off of, blasphemy!


matches the contour of the hood well

crappy picture, but it shows how easy it is to make it fit well


ok... i guess i may be overdoing it with the pictures, but hey, people like pictures!

[psiconauta911]

Very helpeful everybody, thank you!

In the end I´ll do it one way or the other.

I must confess though that said grill caught my eye and heart!

[Słonik]

it is 2 FK (if i remember correctly) badgeless grills cut and made into one.
Correct, this is 2FK home made into one. This is my friend 7A CQ.
Polak is able to do everything

[Ruffiano]

Oh i lied, I looked up my conversation with Maro, it is "The front grill is custom made. It was made from two JOM grills"

[psiconauta911]

You really are a very helpfull group!

I´ve been through the FK catalog and there are some nice grills to either cut and paste or heat and stretch.....but none of them are like the one in the picture although nice.

What about this JOM ones where can I look at them?

And a big applause to MARO for the brilliant work his grill is phenomenal I would never guess it was cut and paste job!

[speeding-g60]

http://www.jom.de/gb/Aerodynamic/Radiator-Grills