urs6 front bumper fit on urs4?

[Costash]

Can I fit a Urs6 front bumper in to Urs4?I know they have diferent type of front connections.Does anyone who fit one and share how to?THX!

[UrS4boy]

An UrS4 bumper should fit on an UrS6 and vice versa. Obviously they look different. A6/100 bumpers do NOT fit properly.

[martinjs]

I have one and will try it on my S4 when i get a chance, i think it might look a bit odd due the not having the black inserts like the s4 bumper and the rest of the car has. It has a bit more room behind it to fit a bigger i/c, whereas the S4 bumper is just a heap of turd IMO.

[Costash]

The Urs4 has diferent mounting brackets in the front of the bumper.It is not straight fit!Thats way I am asking if anybody done this already

[martinjs]

Yes i know, you need the aluminium brackets that bolt to the chassis legs for the S6 bumper. Saltinot has done it.

[martinjs]

http://quattro.polter.net/

[Costash]

Yes nice but were I found those adaptors??Don t have any ideea what to use to make them

[martinjs]

Find someone breaking an s6, try VRS.

[Costash]

I've send an e-mail !

[spink]

pretty sure the brackets are same as any a6??

i shall compare some a6/s6 tomorrow

[Costash]

Cheers Spink!Wait for an answer!

[UrS4boy]

Euro and North American UrS bumper bracket PNs

The Urs4 has diferent mounting brackets in the front of the bumper.It is not straight fit!Thats way I am asking if anybody done this already

My bad. North American UrS4 and UrS6 bumpers (bigger than the Euro bumpers) use the same mounts. I assumed, incorrectly that the Euro UrS4 and UrS6 bumper brackets were the same. As you pointed out, they are not, as shown below:

Euro UrS4 brackets:



Euro UrS6 brackets:



And just for reference, the North American UrS4/S6 mounts:

The North American UrS4:



The North American UrS6:

[spink]

Cheers Spink!Wait for an answer!

yes they are same between a6/s6 so easy to find

[merlin's S4]

I've done it and yes you need the A6 front ally mounts but you also need the two plastic clips that attach the bumper to the wings.

The rear bumper slides into the same mounts as the S4 but also requires the S6 plastic side mounts.

[Costash]

Thanks alot guys for info!