Announcement

Collapse
No announcement yet.

RS2 Bumper Grills

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RS2 Bumper Grills

    I'm planning on having the front bumper grills taken off, blasted and powder coated.
    The middle one is looking a bit tatty with rust showing in a couple of places.

    Does anyone know if the OEM paint was matt or gloss black?
    RS2+ (now sold...)

  • #2
    Just get x2 rs4 grills instead. Much nicer.
    If you get 3 you can also do the hood grill as well to match
    I thunk it was gloss though on the original.

    sent with Nokia 5110

    Comment


    • #3
      RS2 grilles

      I have an RS2 bumper but no grilles....are you saying that 3 RS4 grilles would give enough materials for the RS2 bonnet grille, the centre bumper grille and the two outside bumper grilles?

      Cheers

      JB
      2001 996 C4 - Being renovated
      1994 ABY Coupe - "Das Smaragd RS2+ Coupe" - Sold

      Comment


      • #4
        Yes. I used x2 as I had a different plastic grill for the bonnet.
        You use one as is and the second you cut to fit to the sides of the bumper. The middle section leaves 2 very small lines on the sides without coverage but they are not noticeable. Only looking at certain angles.

        I must have a photo somewhere .

        Here you go.


        sent with Nokia 5110

        Comment


        • #5
          Looks pretty good
          1996 S2 ABY Silver

          Comment


          • #6
            I like that, maybe ill go for that look also

            Comment


            • #7
              Originally posted by Lloyd View Post
              I'm planning on having the front bumper grills taken off, blasted and powder coated.
              The middle one is looking a bit tatty with rust showing in a couple of places.

              Does anyone know if the OEM paint was matt or gloss black?
              I was looking at mine recently. Aren't they that wrinkle finish?

              Comment


              • #8
                They are gloss black Lloyd.

                Comment


                • #9
                  Thanks everyone.

                  Vas I like the look of your RS4 grills!
                  RS2+ (now sold...)

                  Comment


                  • #10
                    I got fed up of the original ones. So since my rs2 is not original in one bit of it I wasn't that fussed to change them

                    sent with Nokia 5110

                    Comment


                    • #11
                      Thanks Vas,

                      The RS4 ones I guess are plastic and dont have the problem with rusting that the RS2 ones have.
                      2001 996 C4 - Being renovated
                      1994 ABY Coupe - "Das Smaragd RS2+ Coupe" - Sold

                      Comment


                      • #12
                        no
                        but on that note, are not that strong either.

                        the center piece can be mounted roughly with the original screws or a few tyreups. However i had an incident the first time i drove to the uk, behind a lorry, a small rock was sent off his tyres , broke a tyreup and hit my intercooler making a dent. NOthing else serious though. Bad luck i guess, as many run their cars without any mesh and have no problems.

                        anyway, i like it so much more than the original grill which i just replaced the tireup and that was it. no problems since

                        Comment

                        Working...
                        X