cupra r splitter

[ruby-s2]

Ok, so i have seen a couple of S2s sporting an early leon cupra r front splitter and thought it might make a nice addition to my Avant, so got myself one but on offering it up to the car its totally the wrong profile, and i cant see it sitting properly against the lower spoiler on an S2 as it has a double curvature, i started trimming down the centre stantions on the splitter but still dont think it will fit. So soes anyone have any good detail shots of one fitted to as S2?, or any tips for fitting?..cheers.

[jaychen]

http://www.s2forum.com/forum/showthread.php?t=53561

[Dobby84]

Take a look at my project thread

http://www.s2forum.com/forum/showthr...t=53598&page=3

I removed the two upright parts of the splitter and it required a bit of persuading to get it to sit correctly, there is a fair amount of flex in them so should be okay.

I'm pleased with the results although I may adjust mine slightly.

[Error404]

If you heat it up with a heat gun you should be able to mould it gently to be the right shape.

[ruby-s2]

Thanks guys.