fitting rs2 badge

[Eastcoastrs2]

I bought an rs2 recently with no badges fitted. There where two in the glove box still in packaging.
The rear was easy to fit as it had adhesive on the back already.
The front has three plastic prongs on the back that fit through the grill but I can't work out how to attach them. Am I missing a backing or something?

[martinjs]

You are missing something, see pics in this thread.

http://www.s2forum.com/forum/showthread.php?t=69784

[Eastcoastrs2]

Appreciate that thanks. Now I know what to look for.
Any one know where i can get these retaining clips?

[Rikki Kitto]

Sounds a bit strange but I think they look very similar to types of fitting used in the manafacture of soft toys The clips that hold the eyes on teddy bears for instance, check it out might work. Don't think you can get the correct ones anymore but maybethese might work

http://www.adamventure-craft-shop.co.uk/one-pair-of-12mm--brown-safety-teddy-bear-eyes-with-metal--washers-3363-p.asp

[pixsaudisex2]

i got some really small screws and they screwed into the prongy bits.,.
I cut down the prongs and put some washers on etc to hold it in place worked ok for me..

[shaun5]

the nuts that hold the exhaust heat shields on are the same

[sailaz]

I bought an rs2 recently with no badges fitted. There where two in the glove box still in packaging.
The rear was easy to fit as it had adhesive on the back already.

maybe someone knows exact point where to glue rear RS2 badge ? I mean distance in mm from corner and bottom of tailgate