urs4 front bumper (custom or not)

[Nick320]

Dose any body know if this front bumper is a custom job? It has the rs2 look to it.

[EggNChips]

Front Bumper

That looks like a custom lower valance that fits on the OEM bumper, available from:

http://www.lltek.com/S4_S6_C4_classic_frnt_valance.htm

Unfortunately tho it only fits the US style bumper. On the website it says it can fit a Euro spec bumper with slight modification, but I emailed them and they said it doesn't fit at all.....

[Thecrispynoodle]

Dose any body know if this front bumper is a custom job? It has the rs2 look to it.

I think it is the Lltek mod which as other poster suggests is a bolt on to a US bumper and also expensive. In theory no reason you couldn't source a US bumper plus fittings as it's about the most professional looking option and they have side skirts to match. There was a bumper very similar to this made by a German company back in the day, whose name escapes me. There are cheap fibreglass copies of this available from Eastern Europe, one of which I bought and tried to fit last year. I had so many problems with it, and it would have needed so much additional finishing before it could even be primed that I cut my losses and bought a new OEM bumper. To get it to even fit I had to cut about an inch off the 3 rear vent sections and relocate the ps fluid cooler, but eventually gave up as couldn't get a fit that I was happy with. If you are up for a LOT of prep and fitting work then that might not be a big deal, I simply ran out of time and enthusiasm. I can post links to the dealers if interested. See link below to excellent Quattroworld page on bumper variations including the above mentioned German made one.http://forums.quattroworld.com/s4s6/msgs/116410.phtml

[Thecrispynoodle]

The contemporary aftermarket bumper was made by Zender see http://forums.quattroworld.com/s4s6/msgs/240637.phtml and http://forums.quattroworld.com/s4s6/msgs/244968.phtml for my lengthy diatribe on trying to fit a similar fibreglass one.

[Thuppu]

Yeah, I would say that is like EggNChips told. "Long nose" US bumper with the add on fitted.

[Nick320]

Thanks guys.

[fish]

There used to be one that fit the eurobumper too www.garaget.org/?car=92337&image=1015252

[Ruffiano]

There used to be one that fit the eurobumper too www.garaget.org/?car=92337&image=1015252

not the best job fitting it... i can see the screws they used...

[Thuppu]

There used to be one that fit the eurobumper too www.garaget.org/?car=92337&image=1015252

Any link where to buy this? Looks nice. The only euro bumper add-on I know about looks quite fugly: http://www.tuningdesign.net/product/...puskurinlisays

[fish]

Yeah, i saw the screws too. No idea where it is from though.

[Thecrispynoodle]

That can't fit both an A6 and S6, different bumper widths. Similar from ebay and defo fits S4 http://m.ebay.co.uk/itm/AUDI-100-S4-...-/180922264461 sorry it's a mobile link. It has vents though not to everyone's taste and not really in keeping with style of the rest of a C4 especially an S4 (side mouldings with your vents sir?)

[mushasho!]

Speaking of Euro bumpers, what core is the preferred choice to fit behind it... I would trade my US bumper for Euro if it didn't mean completely destroying it to fit a 3" core.

Sent from my HTC One using Tapatalk

[Thuppu]

That can't fit both an A6 and S6, different bumper widths. Similar from ebay and defo fits S4 http://m.ebay.co.uk/itm/AUDI-100-S4-...-/180922264461 sorry it's a mobile link. It has vents though not to everyone's taste and not really in keeping with style of the rest of a C4 especially an S4 (side mouldings with your vents sir?)

This one would propably bee the best choise for UrS4 if you wan't a RS style bumper. There are mouldings shapes on it, of course they need to be painted black.

http://www.tuningdesign.net/product/129/etupuskuri-s6s4

[Thecrispynoodle]

This one would propably bee the best choise for UrS4 if you wan't a RS style bumper. There are mouldings shapes on it, of course they need to be painted black.

http://www.tuningdesign.net/product/129/etupuskuri-s6s4

I agree, but that's the exact bumper I had so much trouble fitting, however so be aware of that.

[Thuppu]

Aah, it was you that made the story about fitting that thing, ok.