front wings / body work compatibility

[willg54]

Whats body panels are compatible for the s2 from a standard coupe?? Primarily front wings and doors?

[spink]

yes they are identical as are rear bumpers,bonnets and tailgates

[willg54]

Cool, may have found a bodywork donor!

[montyrs2]

If its a straight coupe shell I need the rear panel. I'd need it cut of about 6 inches in front of rear lights. Plus probably front wings.

[willg54]

Could sort out rear quarter no problem. I want the front wings off this one as the paint on mine is poor from my attempted respray on them. Theyre rust free so will be selling them after.

Cheers

Will

[montyrs2]

I'd like first dibs on the old front wings please. As long as straight and rot free they are what I'm after. On the rear I need the rear panel not quarter. I basically need to chop the back 6 inches off the car please.

[K Simmonds]

If you end up with a Coupe to cut Will and have time etc I'd quite like both sill's if their straight and rot free, not in a hurry and could come and remove them, it takes a day to get both off cleanly!.

[willg54]

sounds like this car could be worthwhile for many of us!

Just looking into transport before I commit - need to move it to my Dad's farm to be cannibalised

[willg54]

I'd like first dibs on the old front wings please. As long as straight and rot free they are what I'm after. On the rear I need the rear panel not quarter. I basically need to chop the back 6 inches off the car please.

yes, the wings are decent. One was a replacement wing that I sprayed up, the other did have a small bit of rust on the arch that I repaired. Both straight with no dents.