Window rubber seals - RS2 rear window ?

[RS2junkie]

Help !

Need to do some bodywork to the rear quarter panel that will need the glass removed, where can I get the rubber seals to do the job, I think I need the one that goes the whole length of the car and the bit that goes along the bottom and up the C pillar ?

Please don't say they are NLA , in which case does anyone have any suggestions ?

Paul

[irishs2]

The black trim that goes from front to back is NLA.
The black trim can be removed with out damage.

But the seal is still available. You also can remove it without damaging it.

But if it does get damaged, it does look like its still available, €140 or so.

[RS2junkie]

The black trim that goes from front to back is NLA.
The black trim can be removed with out damage.

But the seal is still available. You also can remove it without damaging it.

But if it does get damaged, it does look like its still available, €140 or so.

Thanks, you are a star, will get one ordered fast....

Paul

[irishs2]

This might show you how they separate.

You will also need the black plastic tabs, 8A9853231 x3
They retain the glass while its setting and give the c cover something to hold.



More here:
http://www.s2forum.com/forum/showthr...=42945&page=15

[RS2junkie]

Great information!, patience and this sort of "how to" write ups are vital to keep these cars on the road, thanks

Paul