Audi ur quattro front bumper

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • redcar
    S2Forum Enthusiast
    • Jan 2005
    • 134
    • Country: United Kingdom

    #1

    Audi ur quattro front bumper

    Any one know how to take it off? cause i need to get the crank but there no space what so even for a breaker bar or ratchet.
    cheers.
  • riche164
    S2Forum Fanatic
    • May 2013
    • 76
    • Country: Ireland

    #2
    Hi remove the headlights and grill. You'll see a 17 bolt each side undo these this allows you to slide out the middle section of the bumber. When that's out there's a few screws and some under each wing it's fairly straight forward

    Comment

    • redcar
      S2Forum Enthusiast
      • Jan 2005
      • 134
      • Country: United Kingdom

      #3
      Originally posted by riche164
      Hi remove the headlights and grill. You'll see a 17 bolt each side undo these this allows you to slide out the middle section of the bumber. When that's out there's a few screws and some under each wing it's fairly straight forward
      What type of screws are they?

      Comment

      • redcar
        S2Forum Enthusiast
        • Jan 2005
        • 134
        • Country: United Kingdom

        #4
        Do you have any pics of what the bolts are? i can't seem to find them

        Comment

        • riche164
          S2Forum Fanatic
          • May 2013
          • 76
          • Country: Ireland

          #5
          With the headlights out on the drivers side you will have to move the air pipe going from the turbo to the metering head look down towards the chassis leg it's easier see on the other side. The screws behind the middle section you'll need a 10 spanner

          Comment

          • Skull
            S2Forum Possessed
            • Mar 2004
            • 3506
            • Country: Slovenia

            #6
            It is hard or impossible to see them on an urquattro. Search on the radiator side, it is on the side of the chassis beam under the headlight.
            Audi Quattro WR

            Comment

            • adam g
              S2Forum Addict
              • Feb 2007
              • 445
              • Country: United Kingdom

              #7
              you only need to take the bumper surround off to get to the crank bolt not the middle piece (assuming you have the 2 piece bumper) The screws for this are best accessed from under the car.

              Comment

              Working...