Rust killer

[imp998]

https://www.youtube.com/watch?v=WgiecR6LzwA

Not tried one but they look s**t hot

[diesel des]

http://chasecorp.com/products/plasgard/plasgard-410/

Sent from my LG-H955 using Tapatalk

[diesel des]

We use jotan paint on work and it seems good. I still prefer plassgaurd.



Sent from my LG-H955 using Tapatalk

[gnutz2]

You need a 2k/epoxy zinc based primer on first and then a coat of Jotamastic 80 or 87 on top, then I usually cover over with a 2k colour coat.

Dont consider 1k paint, even clean steel will rust with only 1k paint on top.

Jotamastic https://www.smlmarinepaints.co.uk/primers

Or smaller quantities http://www.rust.co.uk/epoxy-mastic-r...-paint/c28117/

Epoxy zinc base https://www.smlmarinepaints.co.uk/pr...pack/Barrier90

Or smaller quantities http://www.rust.co.ukww.rust.co.uk/0...-anode/p405029

[K Simmonds]

I'd also be interested to have hear some suggestions, I've tried a few things over the years and products from Bilt Hamber seem to be some of the better ones.

http://www.bilthamber.com/corrosion-protection-and-rust-treatments

At the end of the day nothing really seems to work permanently other than media blasting the area to get rid of every speck of rust or welding in new metal.

[diesel des]

I use a portable shot blast kit. Looks like a spray gun. Dam messy but it gets all the rust out. Wire wheels just don't get into all the pits.

Sent from my LG-H955 using Tapatalk

[RichLV]

Some of my known painter guys use a purple stuff called Brunox. Holds pretty well.

[AndyP]

What's everybody using to kill rust? This spot has been wire wheeled to remove as much rust as possible, treated with Hammerite Kurust, primed and stone chipped. After only a week the rust is bleeding back through