How to remove coupe rear window rubber?

[Colesy]

My black coupe is in for paint and need to remove the rubber that runs along the bottom of the rear window, how is it held on?

This one:

[piotr]

I have done it long time ago but as fare as I remember obviously going to have to gently pop out the glass and that rubber along the bottom of the window it's a part of the whole seal.it's held right in the corner by the stud and 10 mm nit . You're have to take some trims out from inside of the car .i will try to send some photo.

[piotr]

[ATTACH]61550[/ATTACH]

[piotr]

[ATTACH]61551[/ATTACH]

[piotr]

IMG_6531.jpg
This black trim needs to be removed as well.its riveted to the body.
Hope this help

[bluequattro]

As above. Rivets out, window out, rubber comes off in one piece
I may have spares somewhere if you need them
Paint shop should do it for you, place I used didnt as I saved money by breaking car down myself-but they took doors wings and tailgate off as part of the job

[Colesy]

Thanks both for the all the info, that's a real help.

Good to do/find out as much as possible to save the paint shop breaking anything was the plan and to save on the labour too.