Announcement

Collapse
No announcement yet.

Glass sunroof frame fabrication

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jamesey
    replied
    Originally posted by Juju-la-Crapule View Post

    Why doesn't he want to? I need a driver's door seal too....
    They won't post to the UK due to brexit screwing there system up with tax or something,,,crazy

    Leave a comment:


  • Juju-la-Crapule
    replied
    [QUOTE=Jamesey;n2107934]

    You will need this part on or it will leak as the rear bit acts as a gutter as I found out
    ok....I would look into putting the metal roof model

    Leave a comment:


  • Juju-la-Crapule
    replied
    Originally posted by Jamesey View Post

    I could really do with using audi tradition but after emailing them they say they can't post to a private sale over to the uk .
    I need door seals aswell as I've lost the drivers side
    Why doesn't he want to? I need a driver's door seal too....

    Leave a comment:


  • Jamesey
    replied
    Originally posted by Juju-la-Crapule View Post
    Here is the part I removed
    You will need this part on or it will leak as the rear bit acts as a gutter as I found out

    Leave a comment:


  • Jamesey
    replied
    Originally posted by Juju-la-Crapule View Post

    The panel must be adjusted in height and the seal changed
    I could really do with using audi tradition but after emailing them they say they can't post to a private sale over to the uk .
    I need door seals aswell as I've lost the drivers side

    Leave a comment:


  • Juju-la-Crapule
    replied
    Originally posted by Jamesey View Post

    Got the panel and I think it will fit but the plastic bit you have taken out is the rear gutter I think.
    my rubber seal on my panel meets at the back aswell with a slight gap so it'll definitely drip .see pics
    See what you think ?
    The panel must be adjusted in height and the seal changed

    Leave a comment:


  • newsh
    replied
    Answered your other post!

    Leave a comment:


  • Jamesey
    replied
    Originally posted by Juju-la-Crapule View Post
    I prefer the original lights.... good news..!!! You will see the panel will be fine
    Got the panel and I think it will fit but the plastic bit you have taken out is the rear gutter I think.
    my rubber seal on my panel meets at the back aswell with a slight gap so it'll definitely drip .see pics
    See what you think ?
    Attached Files

    Leave a comment:


  • Juju-la-Crapule
    replied
    I prefer the original lights.... good news..!!! You will see the panel will be fine

    Leave a comment:


  • Jamesey
    replied
    I've taken these off my car and gone back to standard so as soon as I can post on the for sale section I'll be into it
    but going back to the sunroof I'll be picking my metal panel up on Saturday
    Attached Files

    Leave a comment:


  • Jamesey
    replied
    It looks a perfect fit , yes I've got the sliding bit on still I wondered if that came off .

    Leave a comment:


  • Juju-la-Crapule
    replied
    This is the metal sunroof
    Attached Files

    Leave a comment:


  • Juju-la-Crapule
    replied
    Here is the part I removed
    Attached Files

    Leave a comment:


  • Juju-la-Crapule
    replied
    Originally posted by JariP View Post
    Have you done this yourself, changed only the panel from glass to metal? The fasteners are the same? I've asked this before here if the panels are interchangeable, but the answer last time was they have nothing in common. It won't work. Which one is it? My glass panel has gone rotten as well.
    Yes I made the change myself

    Leave a comment:


  • Juju-la-Crapule
    replied
    Yes, they are adaptable. I simply removed the grey plastic part that slides off.

    Leave a comment:

Working...
X