stainless steel tube, flanges, back boxes 3''

[george21]

i want to build a stainless 3 inch exhaust for my project. can some one recomend a cheap supliers in uk? and how much it will cost in parts/flanges etc.?
is it worth it??
i was looking on few sites but prices so diferent... i'm confused. and what grade tu use
304 or 316. higher the number better the steel?
thank you very much for advice/links

[rynaqui]

Have you tried looking around here?

http://www.034motorsport.com/fabrication-c-50.html

http://www.efiexpress.com/catalog/index.php?cPath=11

About grades I've no idea

Good luck

[george21]

yes i seen them, but it's all in US, i'm in UK...
cheers annyway

[Error404]

http://www.s2forum.com/forum/showthread.php?t=59763

[willg54]

Google Chris tullet, you'll get everything you need from there!

Sent from my GT-I9300 using Tapatalk 2

[george21]

thank you guys, any idea for rough costs for full exhaust including downpipe

[SteveH]

I've used these folk recently, no issues and very fast delivery. http://www.mijexhaustparts.com/

You will need a TIG welder or a Mig with Argon and stainless wire to make your own system. Go for V bands at the joins, it makes it a damn sight easier to put on and take off the sections.

[george21]

cheers Steve, i'm looking on they website and trying to put down on the paper what i need and what costs it will be. looks like £200-250 maybe more if i go for Vband clamps

[Thuppu]

cheers Steve, i'm looking on they website and trying to put down on the paper what i need and what costs it will be. looks like £200-250 maybe more if i go for Vband clamps

I pay'd that amount only for the silencers. + stainless pipe and bends + 2-3pcs V-bands + flexi + catalytic converter + one 20L bottle of argon etc... My exhaust is 3,5-4" though.

[SteveH]

I pay'd that amount only for the silencers. + stainless pipe and bends + 2-3pcs V-bands + flexi + catalytic converter + one 20L bottle of argon etc... My exhaust is 3,5-4" though.

Your Argon must be cheap

You will also need access to a ramp if you are to do this yourself. It's not a job for doing at home on axle stands.

[Thuppu]

Well I mean only that much for the silencers. Everything else is extra. Filling a 20L argon bottle here cost ca. 120e.

I did my exhaust with the car on jack stands. Not the easiest way to do it, but it can be done. Here is few pics of the build if you want to see: http://koti.mbnet.fi/pro-ht/Audi_URS4/exhaust-urs4/

[SteveH]

Well I mean only that much for the silencers. Everything else is extra. Filling a 20L argon bottle here cost ca. 120e.

I did my exhaust with the car on jack stands. Not the easiest way to do it, but it can be done. Here is few pics of the build if you want to see: http://koti.mbnet.fi/pro-ht/Audi_URS4/exhaust-urs4/

Nice fabrication Good job if you worked on your back under the car.

[recall]

Noticed your a Essex boy like myself.

Burton power keep 3" stainless on the shelf inc boxes and flanges ect.

Locate on the A12.

Lance

[george21]

Burton power it's next door from me, but i think they are very expensive, last time i was there for exhaust wrap or someting and been charged nearly double. But i have ago and see what they offer.

[george21]

Very very nice!!!
But i have ago aswell!
Nobody born with knoweledge