cant wait to see how it turns out
Announcement
Collapse
No announcement yet.
Blade Anti roll bars (Sellholm parts)
Collapse
X
-
BEAST '90 CQ 24v VRT / O1E / v8 rear, HOLSET SUPER 40 http://www.theprojectpad.com/viewtop...1&t=193#p37887
DD '86 4kq BLAZE, swapping aba/16vT and O1E http://www.theprojectpad.com/viewtop...1&t=201#p38264
-
I've made all the bar mounts, notched the rear tube and tacked it together ready for a test fit, I'll be making the rear bar first for logistical reasons (small garage)
The nylon bushes came a bit late so I machined the mounts to fit the tube and it works quite well. I might make a groove in the bearing and fit a grease nipple if I decide not to fit the nylon bush.
Pretty simple really, if you are handy with a welder and lathe you could knock one of these up for a similar price to whiteline or neuspeed RARB. One problem is the back subrfame ARB mounting plates are pretty flexy, but I'm giving the subframe a refurb so while its off I'll add some more steel to stiffen it all up
Last edited by gnutz2; 5 March 2014, 23:30.The ONLY S2 Golf!
http://www.s2forum.com/forum/showthread.php?t=19402
10.42@138mph
https://m.youtube.com/watch?v=0wnkkOfFpXg
Comment
-
very niceBEAST '90 CQ 24v VRT / O1E / v8 rear, HOLSET SUPER 40 http://www.theprojectpad.com/viewtop...1&t=193#p37887
DD '86 4kq BLAZE, swapping aba/16vT and O1E http://www.theprojectpad.com/viewtop...1&t=201#p38264
Comment
-
The blades and fittings were £480 posted from Sweden. The t45 bar was £30 a metre but, i had to buy one 5 meter length and postage was a killer.
I have 3 meters of t45 tube spare if anyone needs some @ £30 a meter.
The parts alone without postage cost me about £260 per bar but i need to buy rod ends which will probably make it £300 per bar.The ONLY S2 Golf!
http://www.s2forum.com/forum/showthread.php?t=19402
10.42@138mph
https://m.youtube.com/watch?v=0wnkkOfFpXg
Comment
-
Thanks for the offer James and good idea about making different bars.The ONLY S2 Golf!
http://www.s2forum.com/forum/showthread.php?t=19402
10.42@138mph
https://m.youtube.com/watch?v=0wnkkOfFpXg
Comment
-
Originally posted by my2000apb View Postvery niceThe ONLY S2 Golf!
http://www.s2forum.com/forum/showthread.php?t=19402
10.42@138mph
https://m.youtube.com/watch?v=0wnkkOfFpXg
Comment
-
Originally posted by gnutz2 View PostLike your CQBEAST '90 CQ 24v VRT / O1E / v8 rear, HOLSET SUPER 40 http://www.theprojectpad.com/viewtop...1&t=193#p37887
DD '86 4kq BLAZE, swapping aba/16vT and O1E http://www.theprojectpad.com/viewtop...1&t=201#p38264
Comment
-
The rear bar is done and been on the car for a few weeks now, I've had the car on the road but I need to get the front bar finished and get the car on a track to feel the end result.
While the car was off the road I stripped the back end completely and gave it a full rebuild with shore 95 poly bushes all round. The subframe was modified to cope with the stronger bar and mounted solid to the car.
The ONLY S2 Golf!
http://www.s2forum.com/forum/showthread.php?t=19402
10.42@138mph
https://m.youtube.com/watch?v=0wnkkOfFpXg
Comment
Comment