Announcement

Collapse
No announcement yet.

MC2 ====> mpi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MC2 ====> mpi

    Hey S2 Forum, i recently bought an audi 100 c3 avant 2.2 turbo quattro the engine is mc2 and i would like to take out the CIS injection and do a conversion to a MPI,
    is it possible and can you give me some advise on how to do it.Thanks

  • #2
    It is possible - depends on your wiring skills however.

    Out of interest what is compression ratio on the MC2 engine ?

    Do you have a picture of flywheel ?

    Reason to ask about that is a gauge of how much mechanical work is required to adapt to say the 3B (or AAN/ABY/ADU if you wish to go without distributor).

    I have no idea if you can graft 20VT head onto MC2 block - nor do I know if you can mate the 20VT inlet manifold to the MC2 head either. Anything is possible if you can fabricate special solutions.

    The 10VT engine will need differnt software running in motronic (MPI) so you need specialised help for that.

    The alternative is to go standalone ecu from likes of VEMS or others.
    Paul Nugent
    Webmaster http://S2central.net
    Administrator http://S2forum.com

    1994 S2 Coupe ABY - aka Project Lazarus
    2001 A6 allroad 2.5TDi - family tank
    2003 S4 Avant 4.2 V8 - daily burble

    Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

    There are only 10 kinds of people that understand binary - those that do, and those that don't

    Comment

    Working...
    X