You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Air lock in your system?
Bleed it with the car running and the heater on hot and full speed as yoda bry comments its most likely to be an air lock.
95 Avant Pearl White -
R33 V-spec Skyline 666 BAD Pearl Yellow 560bhp
Evo 6 HKS Bits -Blitz Intercooler, HKS exhaust,Apexi B-C ,Apexi PFC,HKS Manifold,HKS Induction,HKS SSQV , 394@wheels
When I had this problem it didnt turn out to be the matrix but the flap on the airbox that directs the air through the matrix.
For some reason it had jumped a couple of teeth so the flap never closed off to hot air. Got my head under the dash and tweaked it back into place and it works fine now
Take res cap off, open bleed screw on rad and open Matrix hose valve (be careful with this one). When the air seems to have gone (no bubbles)close the rad then the matrix.
Mark
Race Clio RS197
S2 Coupe ABY (Green) - RIP
S2 Coupe ABY (Blue) - Sold
As Mark says, you'll need also to try and bleed the little ******ing bleed valve on the matrix hose - it's a smallish pipe closer to the bulkhead. Be very careful with that little swine of a valve as the thread has a habit of stripping...
Ex S2 owner, now running around in an A4 Avant quattro...
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment