A/c sealant

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bertman
    S2Forum Extremist
    • Apr 2007
    • 1173
    • Current: United Kingdom

    #1

    A/c sealant

    Have developed a small leak on system,have had it checked with sniffer and uv light and cannot detect any leak.(very slow leak)
    Guy has recomended a sealant which is put into system.I suppose acts like radweld for you your a/c system.
    Any of you guys had any experience with this stuff,cannot remember the name of it,comes from the good old usofa.

    Plus can anybody tell me where I can get the correct fitting to re gass on the compresser.Its not a standard fitting(not r12)on a 94 reg car.
    Or what are the dimensions are on the fitting,and is it something I can get hold of.
    Rob

    Ragussa green avant RS2+ spec
    Racing blue Octavia VRS mk2 estate-Remapped now to 250 bhp
    Audi coupe gt-slow as hell but loads of character-sold
  • s2driveruk
    Super Moderator
    • Jul 2003
    • 12696
    • Country: England

    #2
    migt be ok to use but i'd prefer to find the leak - it'll be an o-ring on the system somewhere. have you checked round the circuit behind the drivers side wheel arch liner?

    If you do find it then halfords do a great o-ring kit for less than a tenner with alsorts of metric sizes - i resealed my aircon when i was putting it back together the other weekend on the parts which had been unbolted - hopefully it will be airtight
    sigpic

    1992 3b S2 Coupe

    Comment

    • bertman
      S2Forum Extremist
      • Apr 2007
      • 1173
      • Current: United Kingdom

      #3
      How many o rings are there in the system that could be replaced and where are they situated in the system
      Rob

      Ragussa green avant RS2+ spec
      Racing blue Octavia VRS mk2 estate-Remapped now to 250 bhp
      Audi coupe gt-slow as hell but loads of character-sold

      Comment

      Working...