UrS4 heater fan?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • missmouse
    S2Forum Addict
    • Jul 2003
    • 296
    • Country: Scotland

    #1

    UrS4 heater fan?

    any tips on how to get at the heater fan easily on UrS4? my bruvs one is driving me nuts with its intermittant squeeling!
    Thought I could get some oil into it to keep it going a while longer before we take on the nightmare of getting the dash out to fix it properly!

    simon
  • Nace20
    S2Forum Maniac
    • Jul 2007
    • 721
    • Country: Slovenia

    #2
    you dont have to take the dash out, just take evrything that is under the glass away, under the dash you have to unscreew that chanels that go to legs and then you can take part with fan so much out, that you can take the fan out

    i have change it 1 week ago, it was to noisy, and oil didnt help
    S2 limo

    Comment

    • UrS4boy
      S2Forum Obsessed
      • Feb 2006
      • 11859
      • Country: Canada

      #3
      Originally posted by missmouse
      any tips on how to get at the heater fan easily on UrS4? my bruvs one is driving me nuts with its intermittant squeeling!
      Thought I could get some oil into it to keep it going a while longer before we take on the nightmare of getting the dash out to fix it properly!

      simon
      Here is a step by step to get to the fan from the engine bay (it's really how-to-replace the S6 climate control filter - which the UrS4's don't have):



      Here is one procedure to change the fan (from the engine bay):

      http://forums.audiworld.com/a6100/msgs/32780.phtml

      Here is a trick to speed things up:

      http://forums.audiworld.com/a6100/msgs/41267.phtml

      HTH
      RS2'd 93 UrS4 5 spd sedan
      94 UrS4 V8 6 spd manual avant

      Comment

      • JasonS
        S2Forum Enthusiast
        • Feb 2004
        • 112

        #4
        I managed it by separating the hamster cage fan from the motor and just yanking it out of the hole.. refitting is the reverse except that you have to take the plastic cowl off the other side and then push the fan back onto the motor.

        you'll need to loosen the fan housing as well so you have more wiggle room.

        it's easier with a RHD car as the fan is mounted the other way round to the LHD.
        1996 A6 TDI Quattro Avant, Xenon HIDs, A4 Autodipping rearview.
        Previous: UrS6 with RS2 bits.. <sigh>

        Comment

        • missmouse
          S2Forum Addict
          • Jul 2003
          • 296
          • Country: Scotland

          #5
          thanx guys,
          not looked at the setup yet but from what you are saying, the motor/fan assy is accessed all from the engine compartment & NOT from the inside?
          Thats cool!
          simon

          Comment

          Working...