my temp gauge doesn't work!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rocketdog
    S2Forum Fanatic
    • Feb 2009
    • 58
    • Country: United Kingdom

    #1

    my temp gauge doesn't work!

    the temp gauge on 91 s2 only works intermitently. does anyone have any ideas?
  • Jamo
    Retired OG Mod
    • Mar 2004
    • 21750
    • Country: United Kingdom

    #2
    Faulty MTFS sensor in the coolant rail or dodgy connection in the instrument cluster.

    Comment

    • nikmay
      S2Forum Enthusiast
      • Aug 2007
      • 112
      • Home: United Kingdom Current: Germany

      #3
      Coolant gauge

      Mine on my 91 3b was the same, it was a loose connection on the sender unit. From front of car right hand side under inlet manifold. It looked ok to look at but one of the wires was slighlty loose in the sender unit plug. Gave it a bit of a squeeze with some snipe nose pliers, good as new.
      All Hail the mighty Quattro

      Comment

      • rocketdog
        S2Forum Fanatic
        • Feb 2009
        • 58
        • Country: United Kingdom

        #4
        cheers for the tips lads, ill give your idea's a try. i spend more time under the bonnet than driving the bloody thing!!

        Comment

        • UrS4boy
          S2Forum Obsessed
          • Feb 2006
          • 11859
          • Country: Canada

          #5
          Originally posted by rocketdog
          the temp gauge on 91 s2 only works intermitently. does anyone have any ideas?
          Most likely the F76 Multifunction Temperature Switch (MFTS) aka the Electronic Thermal Switch (4 pin) not the two pin F98 Coolant Pump thermoswitch, as shown in the diagrams in this G62 Coolant temp senser/MFTS-related post:

          http://forums.audiworld.com/s4s6/msgs/148742.phtml
          RS2'd 93 UrS4 5 spd sedan
          94 UrS4 V8 6 spd manual avant

          Comment

          Working...