Heater box pictures please

[Rusty]

I'm after a picture of the front part of the heater box (that sits behind the centre console etc.) with the front flap closed, so that I can see how it looks. There was a gap on mine (1/4" inch or so) and so it now leaks a bit of air to the face vents when on floor or windscreen. I can't remember if this happened on the old AC box or is just hte way it is) so I might be getting my knickers in a twist for no reason.

I'd also like to see a picture of how the geared flap adjusters for the direction flaps line up (there are some marks on them IIRC) as I reassembled these and want to check that I've not got it wrong! If you can align the marks and take a pic, that would be great

[johne]

Sorry Andy, can't do pictures right now but can confirm that on a standard heater box there is a 1/4inch gap down the LHS of the flap even when it's fully closed.

John

[Pat D]

Here you go

[Rusty]

Cheers chaps

[Rusty]

One more request -

I've been fitting in the ECU holder off my AC blower today and only 1 of the screw points on my non AC blower lines up, so I've 'adjusted' it ot make it fit. However, if anyone has a non AC blower from an ABY out of the car and can take a picture of the ECU holder and where it attaches to, I'd be rather grateful!