heating intake filter

**sam80quattro** · 14 October 2013, 06:13

later b4's have pollen filters.. just bolt onto were the plastic duct to the fan is in the scuttle panel

**rynaqui** · 14 October 2013, 06:34

Mine has a pollen filter left hand side under the plastic trim panel. Mine was still the original filter, it was in quite a state

**K Simmonds** · 14 October 2013, 07:42

Yep, as above you need a pollen filter housing (and filter) to replace the wide gauge plastic mesh that bolts to the blower inlet.

**Error404** · 14 October 2013, 08:53

I retro fitted one to mine a while back for the same reason, stop all the crap getting in.
They are NLA so you'll need to find one off a breaker. Make sure you also get the metal spring clip that holds it on, or it will never fit correctly

**Monkeymagic** · 14 October 2013, 09:29

Next question is. Anyone got one?

**LHD_Kid** · 14 October 2013, 12:05

Originally posted by Error404

I retro fitted one to mine a while back for the same reason, stop all the crap getting in.
They are NLA so you'll need to find one off a breaker. Make sure you also get the metal spring clip that holds it on, or it will never fit correctly

What metal spring clip Alex?

**pixsaudisex2** · 15 October 2013, 09:41

Not OEM but id be thinking pair of tights streched over a coat hanger and wedged in the hole..

Then you if in need can remove the tights put them over your head and road rage away..
This blooming GTA is getting to me...

**K Simmonds** · 15 October 2013, 11:08

Originally posted by pixsaudisex2

Not OEM but id be thinking pair of tights streched over a coat hanger and wedged in the hole..

Then you if in need can remove the tights put them over your head and road rage away..
This blooming GTA is getting to me...

That would stop the worst of crap mind you.

**Monkeymagic** · 15 October 2013, 17:02

I might use mu mates method where he bought a cheap filter paper and neatley zip tied it to the gauze.

**andy10v** · 15 October 2013, 17:44

mcandmar did a how to

http://www.s2forum.com/forum/showthread.php?t=24983&highlight=pollen

**Big Lee M** · 15 October 2013, 18:34

I bought mine from Audi not that expensive, well wasn't a few years ago. I have a brand new seal that goes under the filter housing in my garage that I never fitted.

**Monkeymagic** · 16 October 2013, 09:49

Like most things with these now. I believe they sre nla.

**Error404** · 16 October 2013, 10:49

The clip just holds the filter housing on properly - its loose without it. I would take a picture of mine but its packaged up in a box somewhere as my dash is out currently

heating intake filter

heating intake filter

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment