Heater Motor.. Again !

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RS2junkie
    S2Forum Addict
    • Mar 2011
    • 409
    • Home: Ireland Current: Bahrain

    #1

    Heater Motor.. Again !

    Hi,

    Looking for a bit of advice on electrics

    Had a new heater motor fitted but it stopped working again after a very short time. Took a look today and found the power and earth cables had been reversed at the connection to the motor ! (they are different sizes but its possible to switch them !!)

    Could this cause damage or will the motor just run in reverse. I assume it would just run backwards, or not run at all ??? I checked the motor is still spinning by accessing the pollen filter, and its spinning freely... I changed the thermal fuse on the resistor pack as I know this is the usual culprit, but nothing ....

    Any ideas on how to test what could be wrong ?

    Thanks
  • alexqts
    S2Forum Fanatic
    • Sep 2012
    • 92
    • Country: United Kingdom

    #2
    See this from SJM, it might help:

    I might see if my wires are reversed also, blower motor is vibrating like crazy and almost no airflow...



    Just seen that you're in Guildford, i'm near Weybridge - come to think about it, sure i've seen you around

    Comment

    • LSG
      S2Forum Maniac
      • May 2010
      • 898
      • Country: United Kingdom

      #3
      I guess you have changed the wires round to the unit. Maybe check if you have power on the live and the earth is an earth.

      Comment

      Working...