Hi just looking through some of the old posts about changing the exhaust and so on. I was thinking of taking the cats out and bypassing them first. After that i will get the mid section. (i already have the back box) Looking through i found this from Doug:
Robo - you have to be careful changing the exhaust - the standard one is so restrictive that you can see lots more low down torque - so you will need a remap after. Make sure you get an M12x1.5 threaded adapter on the downpipe - like the original - so you can get it mapped properly
I already have the generic remapp from Doug and Mihnea and was wondering would i need a remapp if i bypassed the cats.
Robo - you have to be careful changing the exhaust - the standard one is so restrictive that you can see lots more low down torque - so you will need a remap after. Make sure you get an M12x1.5 threaded adapter on the downpipe - like the original - so you can get it mapped properly
I already have the generic remapp from Doug and Mihnea and was wondering would i need a remapp if i bypassed the cats.
(just need the RS2 Airbox)
Comment