if i put a full system on how different will it drive and will i notice much difference as i am after 3rd gear overtaking power not 0-60 type performance
-
May '95 Black S2 Avant, standard with K&N filter -
They do make a difference - but it will need to be remapped to take advantage of less backpressure.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8 -
What sort of money is it for this setup and where from?Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Spoke to Tim the other day at QRSport about a Milltek 3" system for the rs2. If i can organise a group buy he said he'll buy happy to speak to Milltek and organise something.
GavS2 Cabriolet.........
Comment
-
I was originally looking into custom DP & system but excessive prices, noise and doubts about the quality of the place that quoted me (and the fact that I as selling!!) had made me think otherwise.
Please excuse going off at a slight tangent but IIRC the RS2 DP is 2.75" rather than 2.5" but is there any real-world gain from an extra 1/4" on a K24? I would have thought that there were many other items that are of better value for money before the DP becomes a severe issue... or am I just plain wrong!Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
qst quoted around 1350 inc vat and postMay '95 Black S2 Avant, standard with K&N filterComment
-
A custom built exhaust with single cat / cat replacement, 3" bore and separate WG pipe was £1100 fitted. Could be made cheaper by removing the separate WG. I take it that the major part of that is the high flow cat(s) and that the price includes the Milltek DP?Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
I think bibby got a price better than that 8\900quid i think.sigpicComment
-
Des i might be able to get a trade price on the Milltek as i work for a AUDI specialist occationaly.sigpicComment
-
Prospeed?? they did one for SR71 as well looks and sounds really good!
Bit of a travel for us though I think they are in Cardiff?Kingdoms are run by Kings, Dictatorships are run by Dictators.
England must be a Country. :mischeif:Comment
-
my full s/s 3in system from turbo back no cats two boxes cost about 700 all in from longlife, quality exausts i might add and top service.Pearl white 91-S2-3B K&N cone air filter - Home made induction pipe work - 18" RS4 replica alloys - Yokohama Parada Spec 2 rubber - Colour coded body work - Bilstein/H&R suspension - s/s 3in turbo back Longlife exhaust - SFS water hoses - Samco boost hoses - RS2 FARB - RS2 eyeballs - Squeaky interior trim
& 2 bar! Comment
-
Did you notice any improvement with the Longlife ex.sigpicComment
-
There's one really near me but Neil (CHEN) had one made by them and he experienced a few prolems. Robo also got a full DP system & WG pipe but I don't know how he got along with it???Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
milltek
yesMay '95 Black S2 Avant, standard with K&N filterComment
-
zorted
that sounds like a good idea .by the way would an rs2 mill tek zort fit on my avant cat back .1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fittedComment
Comment