RS2 parts on the S2 avant?
Did Audi use any RS2 parts on the S2 avant?, My friend ''Briggsy'' has just bought a 95 S2 avant & i'm sure it has a RS2 inlet manifold but without the badge 
Anyideas
Anyideas
-
sigpic -
Without the badge you mean the : Powered by Porsche??Go Holset or Go RS4 -
Yep, bin end stuffMark
Race Clio RS197
S2 Coupe ABY (Green) - RIP
S2 Coupe ABY (Blue) - SoldComment
-
bin end stuff?Originally posted by rotoryboy
sigpicComment
-
yep, you can tell as it has a raised outline where the badge should beOriginally posted by Billman
sigpicComment
-
when they ran out of S2 parts they fitted RS2 bits. Late S2's have RS2 FARB's etc......Mark
Race Clio RS197
S2 Coupe ABY (Green) - RIP
S2 Coupe ABY (Blue) - SoldComment
-
Like this ?
It's just been produced from a modified RS2 inlet casting mould. They couldn't really get away with the real deal RS2 one bolted on a non RS2.
That pic is from my engine, my bro's 95 aby Coupe is the same.
Thats the only difference from the other ABY inlets.
Jas
Last edited by Jas11n; 27 January 2006, 02:38.2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
thanks Jas thats it, does it have a threaded nipple for the Dv vac line ?Originally posted by Jas11nLike this ?
It's just been produced from a modified RS2 inlet manifold casting mould. They couldn't really get away with the real deal RS2 one bolted on a non RS2.
That pic is from my engine, my bro's 95 aby Coupe is the same.
Thats the only difference from the other ABY inlets.
Jas
sigpicComment
-
hi all.
to jas, so you dont think there is any internal differences from a oe aby im??1995 B4 Audi 80 S2 avant 267bhp and 326lbft *sold*
2001 P38 Range Rover DHSE 159bhp and 255lbft
1985 Type85 Audi 90 quattro 135bhp 140lbftComment
-
I'll check it in the morning for you, and post it here. Neighbours may get a little irked if I go out now, Mark upsets them enough with his exocet on a weekendOriginally posted by Jon441cc
2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
Nope, there is no difference at all externally/internally between the ABY inlet and the RS2 inlet apart from the text on top.Originally posted by Briggsy2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
Cheers Jas
sigpicComment
-
thanks jas..........!!1995 B4 Audi 80 S2 avant 267bhp and 326lbft *sold*
2001 P38 Range Rover DHSE 159bhp and 255lbft
1985 Type85 Audi 90 quattro 135bhp 140lbftComment
-
Digging through some of my pics and I came up with a result. It looks like the DV vac line nipple on the end of the inlet is indeed threaded.
Click the pic below.
Blown up version of the above pic.
I'm assuming yours is borked ? If so I'm sure it's been asked before about it's part number without a definative answer. The "FA" defo doesn't show it for the ABY/ADU or even the 3B.2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
-
Knew I'd seen this topic somewhere before.
Linky2001 Avus Silver B5 RS4.
2004 A4 Avant 1.8T quattro Sport-LE.
1995 S2 Coupe - sold (sniff)Comment
Comment