I did it the same way as my oil pan...
-
//-\\ ((_)) //)) // -
BIG pic
//-\\ ((_)) //)) //Comment
-
Thatguy... did you take off the compressor housing off to polish it ?
Looks awesome ! i might get my t04e done :mischeif:sigpicComment
-
When I had the turbo rebuilt I dropped the turbine housing off for the ceramic coating and I brought the compressor housing home to polish... Made it real easy.//-\\ ((_)) //)) //Comment
-
Good thinking
sigpicComment
-
I wonder.......
Can this be done a brand spanking new turbo, i.e dismantle it without any adverse effects?
Also did you get the hotside coated on the outside only or inside and out?
So many questions so little money
Comment
-
Jamo I had both the inside and the outside coated on the turbine, EM and wastegate.
My thought is if only the outside is coated it will hold all the heat in the metal, if the inside is coated too it will help block the metal from absorbing some heat. I was told by the guy at PC that I could hold my hand about 1" away from the turbine housing while the motor is running.
Andrew//-\\ ((_)) //)) //Comment
-
Originally posted by ThatGUY
I'm having trouble finding someone in the U.K to coat inside and out, they will only coat new EM, downpipes inside.
Was yours new when you had it coated?Comment
-
no mine was used...
//-\\ ((_)) //)) //Comment
Comment