Cut 5 into 1 collectors $150+shipping

[olsonjus]

I figured I could offer cut 5 into 1 collectors for the DIY turbo header project. They can be 1.5" schedule 10 or schedule 40 stainless steel piping. They are approximately 4.5" tall. They can be setup for either t3 or t4 flanges.

1.5 sch40 = 1.610" inside diameter and 1.9" outside diameter.

1.5 sch10 = 1.682" inside diameter and 1.9" outside diameter.

The price will be $150 + shipping. Expect a 2-4 week wait from the day you order.

Here is a picture of one of my collectors taped together. This version is 1.5" SCH 10 with a t4 flange outlet size.









I can also sell you a DIY header kit for $275+shipping

Cylinder head flange
Turbine inlet flange(t3 or t4)
Collector
Waste gate flange (tial 35/38mm, 40mm, factory Audi available soon)
(tubing and bends can be included for extra $)


Regards,
Justin

[repo]

May I ask what kind of setup You recommend 41mm ID tube?

[olsonjus]

I would recommend 1.5" schedule 40. That is almost exactly 41mm.

1.61" x 25.4mm/in = 40.894mm

[Jensk]

wheren't you building a whole tubular EM with one of these? how is that going? remember seeings some pictures