RS4 2.7 TT Exhaust on S2-RS2 Avant

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Billman
    S2Forum Freak
    • Nov 2004
    • 4129

    #1

    RS4 2.7 TT Exhaust on S2-RS2 Avant

    Hi, does anyone use this Exhaust on these cars? Any pictures?

    How does it sound compared to the RS2 one?

    Anyone has any data on the diameter of it?

    Thanks
    Go Holset or Go RS4
  • Billman
    S2Forum Freak
    • Nov 2004
    • 4129

    #2
    Nobody has that info?
    Go Holset or Go RS4

    Comment

    • jade
      S2Forum Extremist
      • Jan 2005
      • 1811
      • Home: New Zealand Current: Spain

      #3
      Hi its 75mm fits fine just a very little bit louder than the rs2 one
      RS 2 580HP

      Comment

      • Billman
        S2Forum Freak
        • Nov 2004
        • 4129

        #4
        I think the RS2 one is 65mm, that means that the RS4 is for more power.

        for what is 75mm good?
        Go Holset or Go RS4

        Comment

        • Mihnea
          S2Forum Extremist
          • Jul 2003
          • 1288
          • Home: Belgium Current: United Kingdom

          #5
          a stock RS4 exhaust is good at 420 crank HP on an RS4. change it to a better cat-back exhaust and you can get close to 440.

          If you can get it for free, use it, if not, not worth the hassle IMHO.

          Mihnea

          PS: best RS2 system ever: Supersprint.
          '98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs

          www.MRCTuning.com
          info@MRCTuning.com
          Workshop Directions

          Comment

          • Billman
            S2Forum Freak
            • Nov 2004
            • 4129

            #6
            Thing is a can get one relative Cheap and as it is full of Audi Numbers so i dont have to pass it through the TÜV. I think nobody is going to check if these Audi numbers are for the RS4 and not for the RS2.

            My thought is that many people are using the RS2 exhaust till 420 (thats what i have read, dont know if it is right) so since the RS4 is bigger then it is better at the 420 region and maybe even for more.
            Attached Files
            Last edited by Billman; 8 November 2006, 00:24.
            Go Holset or Go RS4

            Comment

            Working...