Induction kit!

[Slim m]

Induction kit!? which is the best for an s2 3b as far sa space and cold air are consernd??

[s2_bo]

Most people go for BIG K&N filters, personally i went for Apexi as they are slightly shorter and not need oiling

Depends what your after though.

There is loads of thread on here discussing what Air/panel filters people have used.
Just have a search


Cheers.
Bo

[Slim m]

thanks Bo i wil have a look.

Liam.

[Jamo]

Apexi or HKS but you need a cold air feed and heat shield from the turbo.

Quite a few people have gone back to stock air boxes as the S2 isn't very tolerant of induction filters drawing in hot air.

[terrybullwon]

Yep,
as jamo said it can be worse than an air box. I get lots of hot air in traffic but when i moving its perfect, this is what i have done.
It will be changing soon :mischeif:
[IMG][/IMG]

[Slim m]

I thought of HKS myself but wasnt sure! Il look into it.

Thanks Jamo

[Jamo]

Ah read this, it may be of interest to you why people recommend the Apexi http://www.mkiv.com/techarticles/filters_test/2/

[Slim m]

I want one!!!

[Corey]

Don't use an oiled air filter it ******s up the MAF, RS2 airbox is the preffered mod

[Fat Audi 80]

Straight from the Horses mouth.

If it is good enough for Porsche and Audi, it is good enough for me.

I think in general Cone filters are for drag racing and Max power.

[Corey]

I think in general Cone filters are for drag racing and Max power.

Only use something else when you pyhsically cannot fit the airbox, tubular manifold etc.

[Keeper of The Kitten]

I've got Apexi to go in the car but it's going to be boxed in and fed from the grill (aux rad removed).

__MDC__

[Slim m]

what comes with the rs2 air box? is it just the box? (when you buy it new)

Liam.

[Corey]

Upper and lower halfs, the clips to hold it together and the heat shields.

[BRY]

Can't wait for mine to be fitted